about us
Beijing Earlybird
Beijing Earlybird Industry Development Corporation Ltd (“Earlybird”) was founded in 2008, establishing its head office in Beijing and production base in Changsha city of Hunan Province, located in center of China. For more than ten years, Earlybird has been always providing efficient PV modules, Ongrid/offgrid photovoltaic system products. Business ranges from large-scale Ground-mounted Photovoltaic Power Stations, Commercial & Industrial Rooftop PV System, Residential Rooftop PV System to Solar lighting system and Solar insecticidal lamp.
PRODUCTS
-
EARLYSOLAR- Foldable Solar Panel Bag 20w-300w
Solar foldable bag is a derivative of mobile power supply. It converts solar energy into electric...
-
EARLYSOLAR – 9BB mono glass half-cut mono PERC ...
Key Characteristic *9BB half-cut cell technology: New circuit design, lower internal current, low...
-
EARLYSOLAR-132-Cell Half-Cut Bifacial Glass Mon...
Key Feature *Mould efficiency up to 21.4% achieved through advanced cell technology and manufactu...
-
EARLYSOLAR -120-Cell One-Third Cut Monocrystall...
Key Feature *Mould efficiency up to 21.3% achieved through advanced cell technology and manufactu...
YOU CAN FIND VARIOUS PRODUCTS OF QCELLS
INQUIRYPRODUCTS
-
Bifacial Dual Glass Half-Cut Mono
*10BB half-cut cell technology New circuit design, lower internal current, lower Rs loss Ga dropped wafer, attenuation＜2% (1st year) / ≤0.45% (Linear)
*Industry leading high yield Bifacial PERC cell technology, 5%-25% more yield depends on different conditions
*Excellent Anti-PID performance 2 times of industry standard Anti-PID test by TUV SUD
*Wider application No water-permeability and high wear-resistance, can be widely used in high-humid, windy and dusty area
*IP68 junction box High waterproof level.
-
Half-Cut Bifacialglass Mono Solar Module
*Mould efficiency up to 21.4% achieved through advanced cell technology and manufacturing process
*Special cutting and soldering technology leads low hotspot risk
*Ideal choice for Large-scale Power station installation
*Qualified encapsulating materials and stringent production process control ensure the product is highly PID resistant
*Bifacial technology enables additional energy harvesting from rear side (up to 30%)
*Certified to withstand: wind load (2400Pa) and snow load (5400Pa)
application
-
Application 1
Half-Cut Bifacialglass Mono Solar Module
*Mould efficiency up to 21.4% achieved through advanced cell technology and manufacturing process
*Special cutting and soldering technology leads low hotspot risk
*Ideal choice for Large-scale Power station installation
*Qualified encapsulating materials and stringent production process control ensure the product is highly PID resistant
*Bifacial technology enables additional energy harvesting from rear side (up to 30%)
*Certified to withstand: wind load (2400Pa) and snow load (5400Pa)
-
Application 2
One-Third Cut Monocrystalline Solar Module
*Mould efficiency up to 21.3% achieved through advanced cell technology and manufacturing process
*Lower LCOE,Reduced BOS cost, higher return on investment
*Ideal choice for Large-scale Power station installation
*Qualified encapsulating materials and stringent production process control ensure the product is highly PID resistant
*Special cutting and soldering technology leads low hotspot risk
*Certified to withstand: wind load (2400Pa) and snow load(5400Pa)
-
Application 3
Mono Glass Half-Cut Mono
*9BB half-cut cell technology: New circuit design, lower internal current, lower Rs loss Ga dropped wafer, attenuation＜2% (1st year) / ≤0.55% (Linear)
*Significantly lower the risk of hot spot: Special circuit design with much lower hot spot temperature.
*Excellent Anti-PID performance: 2 times of industry standard Anti-PID test by TUV SUD
*Wider application :No water-permeability and high wear-resistance, can be widely used in high-humid, windy and dusty area
*IP68 junction box High waterproof level.
